Jotrin Electronics
Carrello
arrow
Descrizione Quantità Totale (USD) Operazione
loading
Carrello della spesa prodotti
Carrello della spesa prodotti : 0
Home > Other > PAM8403 Amplifier Board: Pinout, Features, and Datasheet

PAM8403 Amplifier Board: Pinout, Features, and Datasheet

tempo di aggiornamento: 2023-11-29 13:40:40

Contents

The PAM8403 is an amplifier board that readily accepts a 5V input and is capable of driving two 3W + 3W stereo speakers. It is the preferred choice for individuals in search of a Class-D stereo audio amplifier in a compact board layout. This amplifier enables users to achieve superb audio replication from a stereo input source. Its distinctive feature lies in its ability to directly drive speakers via its output.


Overview of PAM8403 Amplifier Board


The primary power amplifier IC featured in this module is the PAM8403, as depicted in the image below. In addition to the IC, the module includes various components like capacitors and resistors.

PAM8403 Amplifier Board.jpg


The PAM8403 amplifier board is a dual-channel (stereo) amplifier capable of delivering a combined 6W output (3W+3W). A critical aspect of any major amplifier system is short circuit protection, and the PAM8403 boasts built-in protection to ensure trouble-free operation. Notably, the PAM8403 Amplifier IC itself does not require the use of a heat sink, making it an excellent choice for custom speaker projects. It can directly drive 4Ω or 8Ω speakers, and it's imperative to match it with a speaker rated at no more than 3W output.


As a stereo amplifier board, the input section accommodates both left (L) and right (R) inputs with a common ground between them. It can amplify a variety of audio inputs, delivering a robust 3W + 3W audio output.


This amplifier module offers a maximum gain of 24 dB with 10% THD when provided with a 5V DC input and connected to a 4 Ohm load. The absence of a heat sink not only saves board space but also does not compromise thermal protection—a vital feature for such a low-wattage amplifier module.


Pin Description of PAM8403 Amplifier Board

Pin NameDescription
LAudio Jack (TRS-Tip) Left Channel Input
GndAudio Jack (TRS-Sleeve) Ground Channel Input
RAudio Jack (TRS-Ring) Right Channel Input
5v(+)5v DC Power VDD
5v(-)5v DC Power GND
L(+)Left Channel Positive Output
L(-)Left Channel Negative Output
R(+)Right Channel Positive Output
R(-)Right Channel Negative Output

Features


  • Wide Voltage Compatibility: Supports power supplies within the range of 2.5V to 5.5V DC.

  • Stereo Powerhouse: Dual-channel configuration delivers a robust 3W+3W output with a 4Ω Load at 10% THD, all at just 5V DC.

  • Maximum Gain of 24 dB: Amplifies signals effectively for enhanced audio performance.

  • Filterless Design: Simplifies setup by eliminating the need for low-pass output filters.

  • Low Quiescent Current and Minimal EMI: Ensures efficient and interference-free operation.

  • Operating Temperature Range: Withstands extreme conditions, functioning reliably between -40°C to +85°C.

  • Short Circuit Protection: Incorporates a built-in safeguard against potential damage from short circuits.

  • Thermal Shutdown: Prevents overheating, ensuring prolonged operational life.

  • Exceptional Noise Control: Produces clear, high-quality audio with minimal noise interference.

  • Up to 90% Efficiency: Offers power-efficient operation.

  • Compact Form Factor: Measures a mere 2.1 x 1.8 x 0.3 cm (LxWxH), facilitating versatile applications.


PAM8403 Amplifier Board Interfacing Diagram


Here is the circuit diagram for interfacing two 3W speakers with the PAM8403 Amplifier Board. The board can be powered using any voltage ranging from 2.5V to 5V DC, but it is recommended to use a 5V input for optimal output performance.

PAM8403 Amplifier Board Interfacing Diagram.jpg


This diagram illustrates how to connect the PAM8403 Amplifier Board to two 3W speakers to achieve high-quality audio output. Ensure you use the recommended 5V input voltage for the best performance.


How to use PAM8403?


Step 1: Basic Information


It's important to note that the PAM8403 is a compact amplifier that operates on a 5V input and delivers a 6W output. This makes it an ideal choice for custom speaker projects, primarily because it doesn't require a heat sink. Furthermore, compared to other audio amplifiers, the PAM8403 offers a cost-effective solution while delivering robust stereo amplification. However, to harness its full potential, proper wiring and a reliable power supply are essential. Keep in mind that using a power supply exceeding 6V can damage the equipment.


an amplifier.jpg


Step 2: Cautionary Measures


Avoid attempting to run your project on a breadboard, as it can result in high distortion rates. When it comes to connections, steer clear of coaxial cables for both DC and audio input, as they can introduce unwanted RF interference and negatively impact audio quality. Additionally, be aware that the PAM8403 amplifier board is available in two variants: one with volume control and one without. Ensure you use shielded and unshielded cables for the respective outputs.

a breadboard with an SOP-16 package-type electrical component.jpg


Step 3: Identifying TRS Pins with Three Leads


Typically, a basic aux or audio cable consists of three wires: two signal wires and one ground wire (often yellow or black). To identify which wire connects to the lead, follow these steps:


  1. Use a multimeter in continuity mode.

  2. Connect one multimeter cable to the bottom lead of the pin and the other to any of the available wires.

  3. A successful connection will result in a beep.

  4. Repeat the process for the signal wires, noting that they can be interchanged since they allow flexibility.


wire cables.jpg


Step 4: Identifying TRS Pins with Four Leads


In the case of TRS pins with four leads, there are four wires: two signal wires, one ground wire, and one positive voltage wire. These are typically found inside headphone amplifiers.

Step 5: USB Cable


A standard USB cable comprises four colored wires: red, black, white, and green. For your PAM8403 amplifier project, you'll only need the +5V (red) and ground (black) wires. Solder these wires to their respective pads on the board after removing the aluminum shielding under the first plastic layer and the aluminum wires surrounding the colored wires.

USB cable.jpg


Step 6: Speaker Connection


The PAM8403 amplifier can drive various types of speakers, but for optimal results, consider using an FRS-rated 4-ohm, 3-watt speaker.

audio speakers.jpg


Step 7: Volume Control


For volume control, you'll need a 10K ohm stereo potentiometer. Follow these steps:


  1. Connect the left output to the top-left corner pin of the potentiometer.

  2. Use a 10uF capacitor to link the opposite end of the capacitor to the top-middle pin of the potentiometer. Connect the positive end of the

    electrolytic capacitor to the left input of the amplifier.

  3. Connect the top-right corner pin of the potentiometer to the ground pin of the amplifier.

  4. Link the right output to the bottom-left corner pin of the potentiometer.

  5. Use another 10uF capacitor to connect the negative terminal of the capacitor to the bottom-middle pin of the potentiometer. Connect the

    positive terminal to the right input of the amplifier.

  6. Join the amplifier's ground to the bottom-right pin of the potentiometer.

a potentiometer with a knob.jpg


Step 8: Testing


In the final step, connect the power supply to confirm whether the amplifier is functioning correctly. You may hear a slight humming sound initially, but it should disappear once you connect the audio cables.


Applications


  • Speaker Output in LCD Monitors / TV Projectors: Enhance the audio experience of your LCD monitors or TV projectors by using the

    PAM8403 Amplifier Board to drive speakers for improved sound quality.

  • Speaker Output Amplifier in Notebook Computers: Upgrade the audio output of notebook computers by integrating the PAM8403

    Amplifier Board, providing clearer and more powerful sound.

  • Portable Speakers: Build portable speaker systems with the PAM8403 Amplifier Board for on-the-go audio solutions, perfect for outdoor

    activities or gatherings.

  • Portable DVD Players: Improve the audio performance of portable DVD players, ensuring a better entertainment experience while on

    the move.

  • Game Machines: Enhance the sound effects and audio output of game machines, creating a more immersive gaming experience.

  • Custom Amplifier-Based Projects: Utilize the PAM8403 Amplifier Board in various amplifier-based projects where space constraints and a

    5V power supply are essential requirements.


PAM8403 Alternatives


Consider exploring alternatives like PAM8406 or TDA7265.


PAM8403 VS PAM8406

PAM8403 VS PAM8406.png


PAM8403 Datasheet


Download the PAM8403 datasheet PDF.


2D Model

PAM8403 Amplifier Board 2D Model.jpg


Conclusion


The PAM8403 amplifier board may be small in size, but it packs a powerful punch when it comes to audio amplification. Its combination of high efficiency, low distortion, and compact design makes it a favorite among audio enthusiasts and engineers alike. Whether you're building a portable speaker, a headphone amplifier, or exploring the world of DIY audio projects, the PAM8403 is a reliable companion that ensures your audio sounds its best.


Read More


Precedente: CR1220 Battery Equivalent, Specification, Application

Prossimo: LM358 Dual Op-Amp: Pinout, Datasheet and Working

FAQ

  • What is the use of PAM8403 amplifier board?
  • The PAM8403 stands as a 3W class-D audio amplifier, renowned for its ability to deliver pristine sound quality through its low THD+N performance.

  • Which speaker is best for pam8403?
  • For optimal results, consider utilizing a 4-ohm, 3-watt speaker with FRS rating when working with audio speakers.

  • How many watts is a PAM8403?
  • 3 watts.

  • Can use the PAM8403 for high-power applications?
  • The PAM8403 is most suitable for low to medium-power applications. If you require high-power audio amplification, it is advisable to explore alternative amplifier board options.

  • What is the input power of PAM8403?
  • 5v input voltage.

Ratings and Reviews

Reviews
 

Carrello

Acconto

jotrin03

Chat dal vivo

sales@jotrin.com