Smart toothbrush solution based on Airoha AB1611 Bluetooth sp02 blood oxygen / blood pressure / heart rate
Introduzione alla soluzione
Now that everything is connected, the era of the Internet of Things is coming. Consumer products are developing towards intelligent wireless applications. Based on this, the AB1611 low-power BLE Bluetooth solution and the accurate spO2 blood oxygen provided by MTK Bio chip MT6381, Blood pressure and heart rate data. Combined with big data cloud database AI analysis service. It can achieve daily monitoring of physical conditions and early notification of physical abnormalities.
AB1611 is a very simple and easy-to-use low-power Bluetooth BT5.0 / BT4.2 BLE chip platform. There is a flash memory that can store GATT transparent application software connected to the mobile phone. The TRSPX bin software, which implements the bluetooth The ADV broadcast packet defined by the BLE 4.2 specification, the mobile APP can also scan AB1611 through the Bluetooth SCAN function, connect and then establish a GATT service, exchange feature values and transmit GATT packages. The software can also perform MTU based on design requirements Sets and conforms to the 185 bytes Bluetooth packet exchange format defined by Android MTU packets and Apple IOS.
There are various FreeRTOS in AB1611, and all the BLE stacks can be used directly. GATT, GAP, SM, FOTA, and BLE mesh stacks are all included in AB1611 and can be used directly.
AB1611 initialization BLE stack code
Init routine, initialize GATT, L2CAP package, OTA function
RSPX_service_init ()-Initialize BLE GATT service and feature exchange
GATT eigenvalue UUID
ADV Broadcast Packet RAW DATA
Software BLE event handler
The Bluetooth stack event is implemented through an event handler.When a mobile phone is successfully connected or disconnected, MTU data is exchanged, and AB1611 will notify the FreeRTOS BT event handler from the underlying Bluetooth hardware.
When the phone is connected to AB1611, it will trigger BT_GAP_EVT_CONNECTED
When the mobile phone transmits data with 1611, it will trigger BLE_GAP_MTU_EXCHANGED, and then display it in the console debug log, which is convenient for monitoring the Bluetooth status and BLE MTU packet transmission data check during development.
Only six C codes are needed to easily complete Bluetooth ble initialization, GATT service and MTU exchange data
AB1611 provides a complete set of toolchain and C compiler. In line with its built-in MCU, Jingxin N9 core, after the installation is complete, a compilation shortcut will appear on your computer desktop.
Compiling is very easy, just type make to compile
Please refer to the compilation picture
Build instructions #make projects / SAC_1611 /
After compiling, just use the AB1611 lab tool for programming.
Launch lab tool, set baudrate to 2M and program flash
Mobile APP software
AB1611 This solution provides a BLE GATT transparent transmission app, which can transfer the blood oxygen and blood pressure data read by the sensor to the mobile phone through Bluetooth ble
Install the app first, then turn on the mobile Bluetooth and scan device, the phone will find the SAC_AB1611 name, and then connect, as shown below
Solution app implementation, read blood oxygen, blood pressure data, and display on the app
Scene application diagram
Product entity diagram
Display board photos
Solution block diagram
antenna test report
Core technology advantages
The Bluetooth 5 SIG mesh solution, AB 1611 is an optimized single-chip solution that integrates baseband, radio, and flash memory for smart lighting and beacon applications. It complies with Bluetooth version 5.0 and SIG Mesh specifications. Embedded 512 KB flash memory is flexible and allows custom software development.
Embedded 32-bit microcontroller with 16/72 MHz clock rate
Embedded 512 KB Flash
64 KB SRAM
9 AIO support (12 bits)
21 GPIO support
Integrated 1.8V switching regulator and 1.8V LDO regulator
Ultra-low power consumption for battery applications
QFN 5x5 40-pin package
MT6381 module specifications:
● Integrated red and infrared light for reflective PPG measurement, LED + single-channel ECG analog front end
● Compact 6.8 mm x 4.93 mm x 1.2 mm, OLGA 22-pin package
● External bill of materials (BOM): 4 capacitors + 2 electrodes
● I2C / SPI digital interface
1.Support BT5.0 SIG Grid Bluetooth
2.Support low power Bluetooth operation
3.Integrated red and infrared light for reflective PPG measurement: LED + single-channel ECG analog front end
4. Provide 6 key health data readings: heart rate, heart rate variability, blood pressure trend, blood oxygen saturation, electrocardiogram, and light volume pulse wave graph.
5.Support cloud service database, AI analysis
6.Support Android, IOS APP
|No.||Numero di parte||Fabbricante|